Knowledge

utility vehicle: The tool cart is suitable for the placement management of tools, knives and parts in the production site, so that your item access work can be truly punctual, accu

Let's take a look at what's in the toolbox: 1. Small drawer ▲The three small drawers on the left, middle and right hold various small tools and small objects such as screwd

▼The handle and hook hole can be seen on the left side. For family use, hooks should not be used to avoid hanging injuries. ▼On the right side, the four casters are still very stro

After investigating these, what I need is a tool cart with both drawer space and cabinet space. The drawer space can put various tools, and the best drawer can be large or small, d

2. Toolboxes, cabinets and carts At that time, in order to store these tools, I inspected many kinds of things, from tool boxes to tool cabinets and tool carts. Toolboxes are usual

1. Classification according to the driving device used: 1. Pneumatic socket (also known as pneumatic socket) 2. Manual socket 3. Electric socket: a socket with an electric wrench a

A socket wrench classification: (1) According to the size (referring to the size of the square head): 1/4″, 3/8″, 1/2″ three specifications, 〃 means inches, 1″ is equal to 25.4MM (

The technical characteristics of the sleeve: 1. It is suitable for reinforced concrete of various structures that bear the two-way force of tension and compression. Rebar connectio

1. Using international No. 45 steel, special manufacturing process, high dimensional accuracy and reliable quality. 2. It can connect HRB335 and HRB400 ribbed steel bars of Ф16-Ф40

1. A special tool for tightening or loosening screws. It is composed of several inner hexagonal sleeves and one or several handles of the upper sleeve. The inner hexagonal edges of

Socket is short for socket wrench. Because it is sleeved on various wrenches and shaped like a cylinder, it is commonly known as a sleeve, and is a commonly used tool for productio

1. There shall be no rust, burrs, cracks and spots, etc.; 2. The wrench is symmetrical, and the laser engraving should be clear; 3. The hardness must reach the specified standard,