
1/2"SOCKET BIT 200mm T55
High industrial quality 1/2"SOCKET BIT 200mm T55 to help optimize and solve problems.
Item No:MP77171
1. Specification analysis and tool nature
1/2": refers to the driving size of the square head of the batch head (i.e. the interface specification connected with the wrench). It is adapted to a 1/2" driven pneumatic wrench, electric wrench or manual ratchet wrench, which can transmit large torque;
200mm: The overall length of the batch head, which belongs to the long specification batch head and is suitable for operation in deep holes or space-limited scenarios;
T55: The pattern specification on the head of the batch head corresponds to the No. 55 Torx pattern and is used to match the T55 internal pattern bolt/screw.
2. Core role and application scenarios
1. Vehicle repair and maintenance
Chassis and engine parts disassembly and disassembly:
Remove/install high-strength pattern bolts (such as suspension system control arm bolts, drive shaft fixing bolts) on the automobile chassis. T55 specification is commonly found in key chassis components of German and American models;
Inspection of pattern bolts in engine cylinder head, transmission and other parts (such as turbocharger fixing bolts for turbocharged vehicles).
Wheel hub and brake system:
The wheel anti-theft screws of some high-end models (such as BMW and Audi) adopt T55 pattern design, and the long (200mm) head can be operated deep into the wheel hub hole to avoid difficulty in assembling and assembling due to insufficient length of ordinary head.
2. Industrial equipment and mechanical assembly
Heavy machinery maintenance:
Hydraulic pipeline joints and gear box fixing bolts of construction machinery (such as excavators and cranes) mostly adopt T55 pattern, and long batch heads can be used in narrow internal spaces of the machinery (such as disassembly and disassembly of parts deep in the engine compartment);
Automated production line:
The pattern bolts of large equipment on the assembly line are tightened (such as industrial robot articulation, conveying line bracket fixation), and used with pneumatic wrenches to achieve efficient operation.
3. Construction and Steel Engineering
Steel structural connections:
In large steel structures (such as factories and bridges), some high-strength bolts adopt pattern design to enhance anti-loosening performance. T55 batch head can be used for pre-tightening and maintenance of bolts;
Equipment installation:
When installing large ventilation ducts and curtain wall brackets, tighten the pattern bolts, and the length of 200mm is suitable for deep clearance between the brackets during aerial work.
4. Electronics and precision equipment (special scenarios)
Dismantling of large equipment:
The frame connection of some large electronic equipment (such as server cabinets and industrial control cabinets) may use T55 pattern bolts, and the long head can be directly operated without removing peripheral components;
Aerospace maintenance:
The pattern bolt maintenance of aircraft landing gear and fuselage skeleton (requires a torque tool to accurately control the force), and the length of 200mm is adapted to the deep hole structure inside the cabin.
3 .Precautions for use
Specifications matching:
Ensure that the T55 pattern of the batch head is completely consistent with the bolt groove to avoid wear of the bolt head or slippage of the batch head due to inconsistent specifications (such as tightening the T50 bolt with the T55 batch head may damage the bolt);
Torque control:
When used with a pneumatic wrench, set the appropriate torque according to the bolt specification (for example, T55 bolts usually require 80-120N·m) to avoid excessive tightening and causing bolt breakage;
Operation safety:
When using a long batch head (200mm), you need to keep your hands stable to avoid bending the batch head or losing control of tools due to leverage effect. It is recommended to hold the wrench with both hands;
Maintenance:
Clean up the metal debris in the head-shaped groove after use to avoid rust; if the pattern teeth are found to be worn (such as dull edges and corners), replace them in time to prevent slipping.

Our Service
One-stop tool solutions- OEM Business and Our Own Brand development Basing on more than 54-year professional production and sales experience, expertise and commitment in delivering professional quality service to world-wide customer base, Maxpower is your reliable partner always!
Skilled Sales Team and Expert Team
Maxpower skilled sales team has undergone Industrial's technical training and business experience. We will definitely provide professional service to respond customers' demands.
Expert Team, Technical Support
We have established two teams of production and engineering technology to coordinate all resources to achieve enterprise innovation and build a smart manufacturing factory. Our vision is to grow with end customers, achieve long-term operations, create one-stop tool solutions for customers, and create new value-added highlights for customers in accordance with lean thinking.
Previous
No InformationYou Might Also Like
Send Inquiry













