Charger Charging Time: 3-4 Hours

Item No:MP1910769

 

1. Core parameters and technical positioning

The nature of charging time of 3-4 hours

This duration corresponds to a medium-speed charging mode and usually matches batteries with a capacity of 2000-5000mAh (such as power tool batteries, drone batteries). Taking a 4000mAh battery as an example, 3-4 hours of charging means that the charging current is about 1-1.5A, which is a solution of "balancing efficiency and battery life". It not only avoids the loss of the battery caused by fast charging and large current, but also saves more time than slow charging (More than 6 hours).

 

 

2. Typical application scenarios and core uses

 

(1) The field of power tools: battery life guarantee and efficient operation

Adapt to mainstream tool batteries

Charge 18V/21V power tool batteries (such as Makita, Bosch, Dewei and other brands, with a capacity of 3000-5000mAh). A battery can be charged in 3-4 hours to meet the continuous use of tools such as drills, angle grinders, and electric wrenches. For example:

When decoration workers use electric hammers to punch holes at the construction site, they use multiple batteries to alternately charge (one for use, one for charging) to achieve uninterrupted operation throughout the day.

When woodworkers use a circular saw to cut plates, the battery charged for 3 hours can support high-intensity cutting for about 2 hours, which is suitable for medium-sized wood processing tasks.

 

Protect expensive battery components

Lithium batteries of brushless motor tools (such as high-end electric mill batteries) are sensitive to charging current. Medium-speed charging can reduce heating and extend battery cycle life (fast charging may shorten life by more than 30%), making it suitable for long-term use by professional users.

 

(2) Outdoor and aerial photography equipment: power supply in multiple scenarios

Drone and model aircraft batteries

It charges the 2200- 4000mAh lithium battery of the DJI Mavic series and cross-aircraft. It can support 20-40 minutes of flight after being fully charged in 3-4 hours. During outdoor aerial photography, it can be used for rotating charging with 2-3 batteries to achieve full-day shooting (such as scenic area surveying and wedding follow-up shooting).

 

Portable power supply and emergency equipment

It can charge 10,000 - 20,000 mAh mobile power supply, which can be charged to 50%-70% in 3-4 hours to meet the emergency power replenishment of mobile phones and cameras during camping; it can also be used to charge the battery of handheld PTZ, wireless microphones and other devices to avoid interruption in shooting.

 

(3) Smart homes and household appliances: daily battery life management

Sweeping robot and vacuum cleaner

Charge the 2000-3000mAh battery of wireless cleaning equipment such as Cobos and Dyson. It can support 60-120 minutes of cleaning after being fully charged in 3-4 hours. When using it at home, you can set up night charging (such as 22:00-1:00), and automatically start cleaning the next day, without taking up daytime use time.

 

Gardening tools and children's toys

Charge the batteries of electric lawnmowers and pruning shears to ensure battery life during weekend gardening; charge the batteries of children's electric toy vehicles (such as electric cars and remote-controlled boats). The waiting time of 3-4 hours is suitable for children's lunch break or school. Completed, does not affect the play plan.

 

(4) Industrial and maintenance scenarios: batch charging and safety assurance

Workshop equipment battery maintenance

The batteries of handheld testing equipment (such as multimeter, laser rangefinder) used in factory assembly lines can be charged in batches through this type of charger, and 3-4 hours of regular charging is easy to manage (such as unified charging before the start of morning shift and replacement during middle shift).

 

Vehicle emergency power charging

Charging the emergency starting power supply (capacity 5,000 - 10,000 mAh) of the car, which can be charged to 80% in 3-4 hours to ensure that the vehicle can start normally when there is a loss of power. It is suitable for backup in auto repair shops or car owners 'families.

 

 

3. Technical advantages and safety design

Compatibility and wide range adaptation

Most 3-4 hour chargers support lithium battery/nickel-hydrogen battery dual mode. Some models are compatible with global voltages of 100- 240V (such as power tool chargers purchased overseas), and no additional converter is needed when used abroad.

 

Multiple protection mechanisms

Built-in overcharge protection (automatic power off after being fully charged), overtemperature protection (current is reduced when the battery temperature is>60℃), and short-circuit protection (to prevent water entering the interface or foreign matter causing faults), which is especially suitable for charging when unattended (such as at night or during work).

 

Energy saving and intelligent power outage

The charging power is usually 10-30W, which is more energy-saving than fast charging (more than 50W); some chargers support the "trickle recharge" mode (small current maintains power after full charge) to avoid self-discharge of the battery and cause power loss. It is suitable for long-term idle equipment (such as spare tool batteries).

 

 

4. Usage precautions and scenario extension

Adapt to battery capacity range

The best battery capacity is 2000-5000mAh:

<2000mAh (such as mobile phone battery), it may be overcharged in 3-4 hours. It is recommended to use a dedicated fast charging head for mobile phones;

When it is>5000mAh (such as a large-capacity energy storage power supply), it can only be charged to about 50% in 3-4 hours, and a higher power charger is needed.

 

Environmental and heat dissipation requirements

Place it in a ventilated place when charging, avoid covering with cloth or placing it in a closed drawer (for example, when the temperature of the charger housing exceeds 50 ° C, overheating protection may be triggered to interrupt charging).

 

Expand application scenarios

Solar charging matching: When working outdoors, solar panels can be used to supply power to the charger, and the tool battery can be charged after 3-4 hours of energy storage. It is suitable for field projects without power grids (such as mountain road construction and forest survey).

Multi-device serial charging: Use a multi-port charger (such as 2-4 USB interfaces) to simultaneously charge mobile phones, headphones, and tool batteries to improve charging efficiency in the home or office.

 

 

 

 

Our Service
One-stop tool solutions- OEM Business and Our Own Brand development Basing on more than 54-year professional production and sales experience, expertise and commitment in delivering professional quality service to world-wide customer base, Maxpower is your reliable partner always!

Skilled Sales Team and Expert Team

Maxpower skilled sales team has undergone Industrial's technical training and business experience. We will definitely provide professional service to respond customers' demands.

Expert Team, Technical Support

We have established two teams of production and engineering technology to coordinate all resources to achieve enterprise innovation and build a smart manufacturing factory. Our vision is to grow with end customers, achieve long-term operations, create one-stop tool solutions for customers, and create new value-added highlights for customers in accordance with lean thinking.