Best practices to remember when using power tools
Due to the widespread use of power tools, workers are often exposed to various hazards. Tools that make tasks easier and more efficient may one day cause tragic harm. When using power tools on the job, it's best to remember common sense safety practices.
Workers should be trained in the proper use of all power tools they may need to use. Workers should also be able to recognize the hazards associated with different types of power tools and take all necessary safety precautions.
Basic rules for safe use of power tools include:
- Use the right tool for the job.
- Inspect each tool for damage before use.
- Keep all tools in good condition with regular maintenance.
- Operate tool according to manufacturer's instructions.
- Wear appropriate personal protective equipment (PPE).
- Never use damaged tools. Stop using damaged tools immediately.

Building Standards 1926.300(a) All hand and power tools and similar equipment, whether provided by the employer or employee, shall be maintained in a safe condition.
- Other safety precautions to remember:
- Keep everyone not involved in the work a safe distance from the work area.
- Never carry tools by the rope.
- Never yank on the power cord to disconnect it from the outlet.
- Keep cords away from heat, oil, and sharp edges.
- When not using power tools, store them in a dry place.

Employees who use power tools and are exposed to hazards from falling, flying, abrasive and flying objects, or hazardous dusts, fumes, mists, vapors or gases must select and wear appropriate personal protective equipment (PPE).
- Eye protection, such as safety glasses or goggles, is especially important when using power tools. Others working in areas where power tools are used should also wear safety goggles.
- Wearing a face shield over goggles may also be recommended during certain tasks, such as when using a grinder. When worn alone, face shields do not protect workers from impact hazards. Even in situations where there is no dust or potential splash, a face mask should be used in conjunction with safety glasses or goggles for additional protection beyond what safety glasses or goggles alone provide.
- Standard cotton or leather work gloves can protect your hands from minor abrasions and cuts, but keep in mind that even cut-resistant gloves don't offer protection against moving blades or drills.
- Safety shoes with non-slip, electrically insulating soles and protective toe caps protect against falling objects and erroneous electrical currents.
- Depending on the tools and materials, certain tasks may require hearing protection, such as earplugs or earmuffs, or even respiratory protection.
- In addition to injuries such as cuts, amputations, and eye injuries, workers who use power tools face greater risks of even more serious hazards such as electrical burns, electric shock, and falls from impact.
- To protect the user, power tools must have 1) a grounded three-wire power cord plugged into a grounded outlet, or 2) double insulated, or 3) powered by a low voltage isolation transformer.
- Double insulated tools are often recommended as they provide an internal layer of protective insulation that completely insulates the tool's outer shell. Look for words or a double square symbol that indicates a tool is "double insulated" to confirm that the tool has a double-insulated safety design.
- All electrical connections to power tools must be suitable for the type of tool and operating conditions (moist, dusty, flammable vapors). When construction uses temporary power, a ground fault circuit interrupter should be used. Disconnect tools when not in use, before servicing, when cleaning, and when replacing accessories such as blades, drill bits, cutters, etc. Do not use power tools in wet or wet locations unless the power tool is approved for that use.
- The best way to prevent injury from the high-speed hazards of power tools is to always keep your hands on the tool handle and keep all guards in place. Never remove or modify safety guards on power tools.

Construction Standard 1926.300(b)(1) When a power tool is designed to accommodate guards, it shall be equipped with such guards when in use.
Always maintain good footing and good balance when operating power tools. Avoid accidental startup. Do not put your fingers on the switch button when carrying a plug-in tool. When operating power tools, keep the work area well-lit. Wear appropriate attire for the task. Loose clothes, ties and jewelry can get caught on moving parts.
General Industry Standard 1910.243(a)(2)(iv) Operating controls for hand-held power tools shall be located to minimize the possibility of accidental operation if such accidental operation would constitute a hazard to employees.
When extension cords are used with power tools, they can introduce additional hazards to the work area. Extension cords can be damaged if they are not properly taken care of because the insulation on the extension cord becomes damaged, exposing live conductors.
When workers handling damaged extension cords come into contact with exposed wires while holding metal tool boxes or touching conductive surfaces, severe electrical shock can result, resulting in falls, personal injury, or death. Make sure power tool cords and extension cords do not create tripping hazards.







