Wire cutters, a daily hand tool, are inconspicuous but play an important role. Safety is always the primary consideration during operation. In order to ensure the cutting effect and work safety, we must master its use and cutting force. Next, let's explore the practical guide and operation points of wire cutters.
How to use wire cutters
01 Cutting metal wires
Place the metal wire to be cut between the jaws of the wire cutters, then hold the handles of the pliers and apply force evenly to cut it. It should be noted that the force should be kept even during the cutting process to ensure that the cut is flat and the pliers will not deform.
02 Cutting steel wires
The operating steps for cutting steel wires are similar to those for cutting metal wires. However, it should be noted that the hardness of steel wires exceeds that of metal wires, so the force should be increased appropriately. At the same time, make sure that the blades of the pliers remain sharp, otherwise it may make the cut difficult to separate.
03 Cutting wires
Before cutting wires, be sure to turn off the power supply first. Since wires are often the channels for electric current, cutting with power on may cause electric shock accidents. When operating, you should place your hand on one side of the wire and cut the other side. After cutting, be sure to use insulating tape to properly wrap both ends of the wire to ensure safety.
Safety and operation points when using wire cutters
01 Wear gloves to protect your hands
When using wire cutters, be sure to wear gloves to prevent the blade from cutting your hands. This is an important step to ensure safe operation.
02 Keep the blade of the pliers sharp
The sharpness of the blade of the pliers directly affects the cutting effect. Therefore, you should check whether the blade is sharp before use and sharpen it if necessary.
03 Cut off the power supply before cutting the wire
If you need to cut the wire, be sure to cut off the power supply first. This is to avoid electric shock accidents that may be caused by live operation and ensure safe operation.
04 Confirm that the operating environment is safe
When operating, carefully check the surrounding environment to ensure that no other people or objects are in the danger range to avoid unnecessary injuries or losses.
05 Master the correct usage and strength
When using wire cutters, you need to be proficient in the correct operation method and appropriate cutting strength. Too little or too much force may cause the pliers to deform or result in poor cutting effect.
