
1pc Air Lmpact Wrench(No.5010106)1pc 5" Extension Rod1pc Oil Pot1 Pc Hex Key Wrench1 Pc Air Intake Connector8pcs Sockets(Sizes:12,13,14,15,17,19,22,24mm)
High industrial quality 1pc Air lmpact Wrench(No.5010106)1pc 5" Extension Rod1pc Oil Pot1 pc Hex Key Wrench1 pc Air Intake Connector8pcs Sockets(Sizes:12,13,14,15,17,19,22,24mm) to help optimize and solve problems.
Item No:MP1910813
1. Core tool: Air Impact Wrench (No. 5010106)
functional orientation
Pneumatic impact wrench: Driven by compressed air, it generates high torque through the internal impact mechanism (suitable for M12-M24 bolts). It is mainly used to quickly disassemble and disassemble rusty, high-strength or close-fit bolts and nuts, which is more efficient than manual tools. More than 10 times.
2. Analysis of the use of supporting accessories
1. 5 "Extension Rod
Extend the depth of operation:
Used to remove bolts in deep holes or hidden locations (such as inside the engine block or deep in the chassis suspension system) to avoid inoperability due to space constraints.
With the socket head, the operating range of the wrench can be extended to 127 mm (5 inches = 127 mm), which is suitable for narrow spaces such as automobile engine compartments and mechanical interiors.
2. Oil Pot
Pneumatic tool lubrication:
Drip special pneumatic oil (2 - 3 drops each time) into the air inlet of the pneumatic wrench to lubricate the internal motor and impact mechanism to prevent metal wear and extend tool life (especially to avoid motor jamming due to dry wear).
Usage scenarios:
Maintain before/after each use, or replenish oil after 2 hours of continuous operation to ensure stable tool performance.
3. Hex Key Wrench
Tool maintenance and adjustment:
Remove the screws on the wrench housing, clean the inside or replace parts (such as impact blocks, springs);
Adjust the torque knob of some models of wrenches (if any), or tighten the accessory interface (such as the connection between the extension rod and the wrench).
4. Air Intake Connector
Air supply connection and adaptation:
Quickly connect the wrench to the compressed air pipe. Common interface types are 1/4-inch NPT or quick-plug type to ensure airtightness (to avoid insufficient torque due to air leakage).
Compatible extensions:
It can be connected to oil and water separators, pressure regulating valves and other air source treatment equipment to filter water vapor and stabilize air pressure (recommended working pressure is 6 - 8 bar).
5. 8 pcs Sockets (12, 13, 14, 15, 17, 19, 22, 24 mm sleeves)
Full coverage of bolt specifications:
12 - 15 mm: Adapt to car interior screws and small mechanical bolts (such as generator fixing screws);
17 - 19 mm: mainstream automobile tire bolts (such as family car M12-M14 bolts), motorcycle engine bolts;
22 - 24 mm: Truck tire bolts, medium strength bolts for construction machinery (such as excavator bucket shaft fixing bolts).
Materials and design:
It is usually made of chromium-vanadium steel or alloy steel, which is resistant to impact and wear. Some sleeves have anti-slip teeth or magnetism to prevent bolts from falling.
3. Typical application scenario combinations
(1) Car maintenance scenarios
Tire replacement:
Use a 17/19 mm sleeve with a pneumatic wrench to remove the car tire bolts in 5 seconds; the extension rod is used to remove the deep-hole bolts of the chassis suspension system (such as shock absorber fixing bolts).
Engine maintenance:
The 22 mm sleeve removes and removes the engine oil pan bolt, and the oil can is lubricated to ensure that the wrench continues to work; the internal torque of the wrench is adjusted to avoid twisting the aluminum alloy cylinder bolt.
(2) Mechanical assembly and maintenance
Equipment disassembly and assembly:
Tighten the motor fixing bolt with a 15 mm sleeve. After the air inlet joint is connected to the air compressor, the pneumatic wrench quickly completes the assembly with a torque of 300 N·m; the extension lever is used for remote operation of the bolts on the back of the equipment.
Pipeline engineering:
The 14 mm sleeve disassembles the pipe flange bolts, and cooperates with the impact function of the pneumatic wrench to loosen the rusty bolts, which is more efficient than the manual wrench (especially suitable for galvanized steel pipe connection).
(3) DIY and home maintenance
Furniture and equipment installation:
The 13-mm sleeve screws the bolts of the air conditioner external unit bracket, and the high torque of the pneumatic wrench ensures the bracket is stable; the oil can is maintained regularly to extend the home life of the tool (when used 10 - 20 times a year, lubrication can only be carried out every six months).
4. Usage process and safety points
1. operational flow
Connect the air source: connect the air inlet joint to the air compressor pipeline, adjust the air pressure to 6 - 8bar;
Installation accessories: Insert the square head of the wrench socket, connect the extension rod as needed (ensure that the circlip is clamped tightly);
Lubricating tool: The oil can drips pneumatic oil into the air inlet and idle for 3 seconds to distribute the lubricating oil;
Operation: Cover the bolt with the sleeve, press the wrench switch, and use impact force to disassemble it (avoid continuous idling for more than 10 seconds).
2. safety precautions
Air source protection: Use a pressure-resistant air pipe (≥ 10 bar) to avoid tube bursting; keep away from the direction of leakage from the air source interface to prevent high-pressure air flow from injuring people.
Anti-splash measures: Wear goggles, especially when removing rusty bolts, to prevent debris from splashing; gloves must be slip resistant to avoid the reaction of the wrench causing hands to be removed.
Maintenance taboos: It is forbidden to use engine oil instead of pneumatic oil (high viscosity may block the motor), and the oil can needs to be cleaned regularly to prevent impurities from entering the inside of the tool.
5. Suggestions for accessory expansion and upgrade
Optional attachments:
Torque limiter: Install on the front end of the wrench to accurately control torque (such as when car maintenance requires 110 N·m, avoid excessive tightening);
Universal joint: Used with an extension rod to achieve multi-angle bending operations (such as diagonal bolts on the side of the engine).
Scenario adaptation:
If you need to disassemble and disassemble large bolts above M24, you can replace the 1-inch socket head (required wrench support) or use it with a torque extender;
When working in a humid environment, install a dryer in front of the air inlet joint to prevent water vapor from corroding the internal parts of the wrench.

Our Service
One-stop tool solutions- OEM Business and Our Own Brand development Basing on more than 54-year professional production and sales experience, expertise and commitment in delivering professional quality service to world-wide customer base, Maxpower is your reliable partner always!
Skilled Sales Team and Expert Team
Maxpower skilled sales team has undergone Industrial's technical training and business experience. We will definitely provide professional service to respond customers' demands.
Expert Team, Technical Support
We have established two teams of production and engineering technology to coordinate all resources to achieve enterprise innovation and build a smart manufacturing factory. Our vision is to grow with end customers, achieve long-term operations, create one-stop tool solutions for customers, and create new value-added highlights for customers in accordance with lean thinking.
Previous
Pneumatic Electric Grinding GunYou Might Also Like
Send Inquiry













