Pneumatic Blade Spring Air Hammer Tool

Item No:MP09904

 

1. Essence and structural characteristics of tools

Pneumatic blade spring air hammer (referred to as "pneumatic blade" or "air hammer") is a tool that uses compressed air as power and drives the blade to impact at high frequency through reciprocating motion of a piston. Its core structure includes:

 

Power unit: The pneumatic motor drives the piston to generate high-speed impact energy;

 

Spring damping system: Some models are equipped with spring devices to absorb reaction forces or adjust impact frequency;

 

Blade head: It can be disassembled and replaced. It is divided into different shapes such as flat shovel, pointed chisel, and V-shaped chisel according to the purpose.

 

2. Core role and application scenarios

1. Metal processing and surface treatment

Derusting and paint removal:

Install a flat blade head to quickly remove rust layers, old paint, welding slag or oxide scales from steel surfaces (such as anti-corrosion pretreatment of hulls, bridges, and storage tanks).

Compared with manual blades, pneumatic impact can efficiently break large-scale scab rust and reduce manual labor consumption.

Burr and flash removal:

Impact removal of burrs and gates of castings and forgings (such as burr treatment of automobile engine blocks and agricultural machinery parts), or polishing raised welds after welding.

Sheet metal parts reshaping:

Gently tap deformed metal plates (such as automobile sheet metal parts, ventilation pipes) to restore the metal to level through high-frequency impact (use with backing plates to avoid excessive surface damage).

 

2. Building and decoration demolition operations

Broken concrete and masonry:

Replace pointed chisel or wedge blade heads to break concrete floors, brick walls, and tile floors (such as wall demolition and wire trench excavation in the renovation of old houses).

Suitable for small construction projects, lighter than hydraulic crushing hammers, and suitable for indoor or narrow space operations (such as kitchen and toilet tile removal).

Dismantling of structural parts:

Remove metal door and window frames and concrete embedded parts, or impact and loosen rusty bolts and nuts (such as removing foundation bolts of old equipment).

 

3. Processing of wood and non-metallic materials

Wood treatment:

Remove nails, glue or paint layers from old wooden boards, or use them for rough machining in wood carving (such as chiseling the outline of a wood carving blank).

Plastic and rubber processing:

Impact cutting thick plastic sheets and rubber products (such as dividing used tires), or removing burrs of injection molded parts (such as t* plastic mold parts).

 

4. Mechanical maintenance and ship engineering

Parts disassembly:

Stuck bearings, gears or bushings through impact vibration (such as removal of engine liners) will destroy the rusty joint surface through high-frequency impact and assist the use of removal tools.

Ship rust removal and cleaning:

Carry out rust removal on steel structures inside the ship's deck and cabin to adapt to the humid marine environment (pneumatic tools have no risk of electric shock).

 

5. Special scenario application

Archaeology and cultural relic restoration:

Equipped with a miniature blade head, it is used for fine crushing of hard soil layers during archaeological excavations to avoid damaging cultural relics (impact strength needs to be controlled);

Pipeline dredging:

Some models can be equipped with a special probe to impact and unblock blockages in small pipes (such as hard objects clogging the floor drain in the bathroom).

 

 

 

 

4. Key use scenarios

Automobile sheet metal repair: Use a flat blade head to impact the back of the door recess, and use a sheet metal hammer to hit it from the front to quickly restore the flatness of the body;

 

Removal of wall tiles: Replace the sharp chisel head and impact along the gap between the tiles to separate the tiles from the wall. The efficiency is 5-10 times higher than that of manual chisels;

 

Rust removal of industrial equipment: On the inner wall of oil storage tanks, use a pneumatic blade and steel wheel to remove large areas of rust layers to prepare for the construction of anti-corrosion coatings.

 

 

5. Precautions for use

Security protection:

Wear earplugs (impact noise ≥90dB) and goggles (to prevent debris from splashing) to keep the arm stable during operation to avoid accidental impact of the blade head on other components;

 

Match gas source and tool:

The air pressure is controlled at 6- 8 bar. If the air pressure is too low, the impact will be weak, and if the air pressure is too high, it may damage internal parts; check the tightness of the air pipe interface before use to avoid air leakage;

 

Blade head selection and installation:

Replace the corresponding shape of the blade head according to the operation requirements (such as pointed chisel for crushing, flat shovel for surface cleaning), and ensure that the fixing nuts are tightened during installation to prevent falling off;

 

Maintenance:

After each use, inject pneumatic tool lubricating oil from the air inlet and idle for 10 seconds to lubricate the piston and cylinder block; regularly clean the metal debris at the connection of the blade head to avoid sticking.

 

 

Our Service
One-stop tool solutions- OEM Business and Our Own Brand development Basing on more than 54-year professional production and sales experience, expertise and commitment in delivering professional quality service to world-wide customer base, Maxpower is your reliable partner always!

Skilled Sales Team and Expert Team

Maxpower skilled sales team has undergone Industrial's technical training and business experience. We will definitely provide professional service to respond customers' demands.

Expert Team, Technical Support

We have established two teams of production and engineering technology to coordinate all resources to achieve enterprise innovation and build a smart manufacturing factory. Our vision is to grow with end customers, achieve long-term operations, create one-stop tool solutions for customers, and create new value-added highlights for customers in accordance with lean thinking.