Electric Screwdriver

Item No:MP1911024

 

Voltage :3.6V
Battery :1pc 1300mah
Machine size :20*12.5*5cm
Speed :200 RPM
Chuck size :6.35mm
Recruitment :4N.M
Charging time :3-5 hours
Function: reverse turn, with LED spotlights
Swivel handle
With charge and discharge protection"
 

 

1. Typical application scenarios and uses

 

(1) Daily home maintenance and assembly

furniture mounting

Tighten the connecting screws (M4-M6) of the wardrobe and desk. The speed of 200RPM can accurately control the torque to avoid cracking of the wooden board; the reverse function can quickly remove the screws of old furniture.

When installing curtain rods and shelves, use LED lights to illuminate the marked points on the wall, and screw in the expansion screws with a 6.35mm collet and a crosshead head.

 

Electrical maintenance

Remove the screws (M3-M5) on the refrigerator and air conditioner shell and repair the internal parts; when cleaning the notebook computer, use a small torque mode to unscrew the screws on the back cover (to avoid damaging the motherboard with excessive force).

 

(2) 3C products and precision equipment

Mobile phone/tablet repair

Combined with a 0.8-2mm internal hexagonal head, remove the mobile phone motherboard screws (M1.6-M2). The torque of 4N·m will not twist the precision screws; the LED lights illuminate the narrow space and improve maintenance accuracy.

 

Toy and model assembly

When assembling the Lego mechanical group and remote control car, tighten the gearbox screws (M2.5-M3) to rotate at a low speed to avoid slipping and wearing of the plastic parts. The rotating handle can adapt to multi-angle assembly.

 

(3) DIY Handicraft and Gardening

handmade

Screw decorative screws (M3-M4) on wooden boards and plastic boards to make storage boxes or small ornaments; the positive and negative rotation function facilitates adjustment of parts positions, and LED lights assist manual work at night.

 

Gardening tool maintenance

Tighten the shell screws (M5-M6) of electric lawnmower and pruning shears. The torque of 4N·m ensures stability without damaging the plastic shell; the battery can be replaced and is suitable for multiple tool rotation.

 

(4) Vehicle-mounted and outdoor emergency response

Disassembly and disassembly of small parts of automobiles

Remove the car interior panel screws (M4-M5), replace the air conditioning filter element or add car accessories; the 1300mAh battery can support the disassembly and removal of about 50 screws, which is suitable for car emergencies.

 

Outdoor equipment assembly

Tighten the screws of the metal connection pieces when building a tent, and the LED lights provide lighting at night. The 3.6V voltage is safe without the risk of electric shock, making it suitable for camping use.

 

 

2. Functional advantages and technical characteristics

Precise torque control

4N·m torque is specially designed for home use:

The recommended torque for M4 screws (wooden boards) is 1.5-2.5N·m. This screwdriver can be accurately controlled to avoid cracking of the wood;

The recommended torque for M6 screws (metal) is 3-4N·m, which just meets the minimum requirements and is suitable for light load connections.

 

Portable and user-friendly design

The body is only 2012.55cm, which is smaller than a mineral water bottle and can be easily held by female users; the rotating handle can be adjusted 180° to adapt to narrow spaces (such as cabinet back, pipe gaps).

 

Balancing safety and battery life

Charge and discharge protection prevents battery bulging. 3-5 hours of charging can support daily use (maintenance 1-2 times a week, 10-20 screws each time), eliminating the need for frequent charging.

 

3. Precautions and restrictions on use

Not suitable for scenarios

It is prohibited to be used for screws above M6 (such as automobile tires and industrial equipment bolts), and the torque of 4N·m is insufficient;

It is not recommended to drill holes in hard materials such as concrete and ceramic tiles (only screws can be screwed, no drilling function).

 

maintenance points

Clean away debris from the cartridge head stuck groove after each use to avoid stuck chuck;

Keep 40%-60% of the electricity when idle for a long time (avoid excessive discharge) and store it in a dry place.

 

Accessories expansion

Additional magnetic head and extension rod (such as 50mm) can be purchased for disassembly and disassembly of deep-hole screws (such as the interior of furniture drawers);

A 6.35mm drill bit can be used with the conversion head, but it is only limited to drilling soft materials such as wood and plastic (low speed and poor efficiency of hard materials).

 

 

Our Service
One-stop tool solutions- OEM Business and Our Own Brand development Basing on more than 54-year professional production and sales experience, expertise and commitment in delivering professional quality service to world-wide customer base, Maxpower is your reliable partner always!

Skilled Sales Team and Expert Team

Maxpower skilled sales team has undergone Industrial's technical training and business experience. We will definitely provide professional service to respond customers' demands.

Expert Team, Technical Support

We have established two teams of production and engineering technology to coordinate all resources to achieve enterprise innovation and build a smart manufacturing factory. Our vision is to grow with end customers, achieve long-term operations, create one-stop tool solutions for customers, and create new value-added highlights for customers in accordance with lean thinking.